Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
9.1. Specifications.
9.2. The general data
9.3. System of compulsory ventilation картера (PCVсистема)
9.4. System рециркуляции (EGR system)
9.5. System доокисления exhaust gases
9.6. System of catching of steams of gasoline (EEC system)
9.7. System of electronic injection of fuel a self-diagnostics mode
9.8. A regulator of a stream of air
9.9. A regulator of pressure of fuel both the solenoidal valve check and replacement
9.10. Gauges of the processor block
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







9-9-regulyator-davleniya-topliva-i-solenoidnyjj-klapan-proverka-i-zamena.html

9.9. A regulator of pressure of fuel both the solenoidal valve check and replacement

Check
1. The solenoidal valve of a regulator of pressure of fuel provides the appendix of depression to a regulator during the moment
Start-up of the hot engine and increase of pressure of injection.
2. The valve requires check if in work ре тора at connection of a hose from the valve failures are observed, and at artificial creation of depression the regulator works normally.
3. Disconnect a socket from the valve and check up pressure from the battery. The disconnected valve should not to pass air.
4. The faulty valve replace.
Replacement
The solenoidal valve
5. Disconnect wires and hoses and turn out the valve
6. Installation is carried out upside-down.
Regulator
7. Execute декомпрессию.
8. Disconnect the battery from weight.

8.9 Regulator of pressure of fuel 1. A vacuum hose         2. A regulator


9. Ослабьте collars, designate and disconnect 2 fuel hoses (photo).
10. Disconnect a vacuum hose and a socket of the gauge of temperature of fuel.
11. Ослабьте a collar also disconnect a hose of a return gasoline pipe line from below a regulator.
12. Turn away bolts and remove a regulator.
13. Installation is carried out upside-down.

«The previous page
9.8. A regulator of a stream of air
The following page»
9.10. Gauges of the processor block