Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
9.1. Specifications.
9.2. The general data
9.3. System of compulsory ventilation картера (PCVсистема)
9.4. System рециркуляции (EGR system)
9.5. System доокисления exhaust gases
9.6. System of catching of steams of gasoline (EEC system)
9.7. System of electronic injection of fuel a self-diagnostics mode
9.8. A regulator of a stream of air
9.9. A regulator of pressure of fuel both the solenoidal valve check and replacement
9.10. Gauges of the processor block
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system


9.6. System of catching of steams of gasoline (EEC system)

The general data
1. The system is intended for catching of steams of gasoline, preventing their hit in atmosphere in the form of hydrocarbons (photo).
2. On a tank the ventilating valve (photo) with two hoses is provided. In the valve there are 2 apertures one of which (большего diameter) is blocked by a diaphragm.
3. Between a tank with an absorber and a fuel tank the control valve which is intended for tank ventilation on the working engine and for transition of steams in an absorber on the stopped engine (photo) is established.

5.2а Details of a tank 1. A cover 2. A diaphragm 3. The terminator 4. A spring

5.2б the Ventilating aperture of the valve of a tank

5.1 Device of system of catching of steams of gasoline 1. A stopper with the vacuum valve 2. Dump of depression of Z.Bak 4. The control valve 5. A spring of a diaphragm 6. The screen 7. The filter 8. A tank with an absorber 9. A ventilating aperture 10. Control ventilating from

5.3 Control valve. Air should pass freely from outside a fuel tank, and in the opposite direction the valve is locked 1. To a tank 2. Steams of gasoline 3. Air 4. To the engine

4. Care of system is reduced to check of a condition of a tank, hoses and valves.
5. At check of a tank air should not pass through a ventilating aperture большего diameter and should pass freely through a highway of a purge and the ventilating valve (photo). Otherwise a tank replace.
6. Vacuum the tank valve it is faulty, if at отсасывании air through the valve from outside a resistance tank it is not felt and there is no characteristic knock.
7. The control valve should not pass almost air from outside a tank and poorly pass at a purge from outside an absorber. Valves which at check show negative result, replace.

«The previous page
9.5. System доокисления exhaust gases
The following page»
9.7. System of electronic injection of fuel a self-diagnostics mode