Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
7.1. Fuel system - the general data
7.2. The fuel filter - replacement
7.3. Idling turns - check and adjustment
7.4. A fuel highway - repair
7.5. A cable of a drive throttle заслонки - removal and installation
7.6. A pedal - removal and installation
7.7. The fuel pump - check
7.8. The fuel pump - removal and installation
7.9. System of electronic injection of fuel - the general data
7.10. Units of control and measuring system with processor block ECCS - the general data
7.11. Декомпрессия fuel system
7.12. The case throttle заслонки (for systems with preliminary injection ТВI of systems) removal and installation
7.13. An atomizer replacement
7.14. System of injection of fuel – adjustments System of preliminary injection (TBI)
7.15. Fuel system clearing
7.16. A tank removal and installation
7.17. The gauge of level of fuel removal and installation
7.18. A tank washing
7.19. An exhaust system the general data
7.20. A forward exhaust pipe removal and installation
7.21. Katalitichesky нейтрализаторснятие and installation
7.22. The muffler removal and installation
7.23. An average pipe removal and installation
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







7-14-sistema-vpryska-topliva-regulirovki-sistema-predvaritelnogo-vpryska-tbi.html

7.14. System of injection of fuel – adjustments System of preliminary injection (TBI)

Check and adjustment of the raised turns of idling
1. Warm up the engine.
2. Be convinced that the adjusting label of a cam is opposite to the centre of the platen of draught of a cam. Otherwise adjust rotating screw S1. It is not possible If to adjust, replace a thermoelement (photo).
3. Check up backlash G between the platen of draught and a cam (photo). If necessary adjust a backlash screw S2 rotation.
The proof-reader of idling of the conditioner (FICD system) check and adjustment
4. Warm up the engine.
5. Check up idling turns.

14.3 Adjustment of the raised turns of idling on the case заслонки 1. A thermoelement 2. The case of a heater 3. Backlash G 4. The lever throttle заслонки 5. Adjusting screw S2 6. The adjusting screw throttle заслонки 7. Remove a cap 8. Draught ку


6. Include the conditioner and check up idling turns.
7. If necessary adjust rotation of the screw (photo).
8. In default the valve of the proof-reader of idling execute following checks (photo).
. Disconnect 8штырьковый a socket.
14.7 Adjustment of turns of idling at inclusion of the conditioner 1. The adjusting screw 2. The valve of the proof-reader of idling


. Include ignition, translate the conditioner switch in a working condition and check up pressure presence on conclusions of a socket (photo),
. Check up integrity of a winding of the valve.
The pneumoshock-absorber check and adjustment
10. Warm up the engine. Check up idling turns, if necessary adjust.
11. Turn заслонку by hand so that the pneumoshock-absorber rod has concerned the adjusting screw of a course of a rod and check up turns of the engine (photo).
12. If necessary adjust turns rotation of the adjusting screw.

14.8 Check of the valve of the proof-reader on engine V6 () and on the 4-cylinder engine () And 1,4. The valve of the proof-reader 2J3. At the included ignition and the conditioner 5. Check of a chain of a winding of the valve of B.Soedinenie with weight 7. Pressure checking 1. The valve the proof-reader


14.11 Adjustment of the pneumoshock-absorber 1. The adjusting screw of the pneumoshock-absorber 2. The pneumoshock-absorber 3. The adjusting screw throttle заслонки


14.13 Check of the valve of the raised turns of idling on engine V6 () and on the 4-cylinder engine () And 1,3. The valve 2. Check of a chain of a winding of the valve In 1. The valve


14.17 Label Q should be opposite to the centre of a roller 1. A roller


14.18 Adjusting screw of a cam () and a counternut


14.19а Backlash G between a roller and a cam 1. A roller 2. A cam


Check of the valve of the raised turns of idling
13. Disconnect 8штырьковый I will corrode (photo) and check up a chain of a winding of the valve.
14. If rupture replace the valve is found out. The new valve tighten and the set moment, having replaced a lining
System of direct injection
System of the raised turns of idling check and adjustment (engine K24J)
15. Warm up the engine.
16. Stop the engine and remove the air filter.
17. Be convinced that the adjusting label (Q) is opposite to the centre of a roller {photo).
18. Adjust a cam, rotating the screw while the cam upper edge will not be established opposite to the centre of a roller (photo).
19. Check up backlash G between a roller and a cam (photo). If necessary adjust a backlash rotation of the screw of Century

14.196 Adjustment throttle заслонки 1. A roller 2. Draught 3. The screw In 4. This label is intended for other purpose (not for adjustment) 5. A cam



«The previous page
7.13. An atomizer replacement
The following page»
7.15. Fuel system clearing