Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
4.1. The general data
4.2. Kinds of the repair work which is carried out without dismantle of the engine from the car
4.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step.
4.4. Covers of heads of cylinders – removed and installation
4.5. The platen with коромыслами - removal and installation
4.6. Hydropushers - removal and installation
4.7. A soaking up collector - removal and installation
4.8. A final collector - removal and installation
4.9. A pulley - успокоитель - removal and
4.10. A gear belt - removal and installation
4.11. A forward epiploon коленвала - replacement
4.12. A cam-shaft epiploon - replacement
4.13. Heads of cylinders - removal and installation
4.14. A cam-shaft - removal and installation
4.15. Details клапанного the mechanism - check
4.16. The oil pallet - removal and installation
4.17. The oil pump - removal, check and installation
4.18. A back epiploon - replacement
4.19. A flywheel (a leading disk of the hydrotransformer) -
4.20. Engine support - replacement
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system


4.17. The oil pump - removal, check and installation

1. Remove a gear belt, a pulley and the pallet.
2. Turn away bolts and remove маслоприемник.
3. Turn away bolts of the oil pump and remove the pump, having displaced blows through a wooden pig (photo).
4. Clear the pump.
5. Uncover and wash out all details in solvent. Turn on заглушку and get редукционный the valve (photo).

16.18 Order of a tightening of bolts of the pallet
1. To a forward part of the engine

17.3б Removal of the oil pump

17.5 Details of the oil pump
1. An internal gear wheel
2. An external gear wheel

6. Check up backlashes of the pump (photo). If one of backlashes differs from norm replace pair of gear wheels or the pump.
7. Fill a cavity наоса with technical vaseline and collect the pump.
8. Grease with hermetic a demountable plane of the pump.
9. Establish all details upside-down, having replaced all linings and уплотнители (photo).

17.6а backlash Check between an external gear wheel and the pump case (), between an internal gear wheel and a crescent insert () and between an external gear wheel and a crescent insert ()

17.6б Check of a face backlash

17.9 Replacement of a sealing ring маслоприемника

«The previous page
4.16. The oil pallet - removal and installation
The following page»
4.18. A back epiploon - replacement