Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
4.1. The general data
4.2. Kinds of the repair work which is carried out without dismantle of the engine from the car
4.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step.
4.4. Covers of heads of cylinders – removed and installation
4.5. The platen with коромыслами - removal and installation
4.6. Hydropushers - removal and installation
4.7. A soaking up collector - removal and installation
4.8. A final collector - removal and installation
4.9. A pulley - успокоитель - removal and
4.10. A gear belt - removal and installation
4.11. A forward epiploon коленвала - replacement
4.12. A cam-shaft epiploon - replacement
4.13. Heads of cylinders - removal and installation
4.14. A cam-shaft - removal and installation
4.15. Details клапанного the mechanism - check
4.16. The oil pallet - removal and installation
4.17. The oil pump - removal, check and installation
4.18. A back epiploon - replacement
4.19. A flywheel (a leading disk of the hydrotransformer) -
4.20. Engine support - replacement
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system


4.14. A cam-shaft - removal and installation

1. Remove a head of cylinders.

14.4а Keeping a cam-shaft for deepening...

14.5а Extraction of an epiploon of a cam-shaft

14.5б cam-shaft Removal

14.6 Check axial люфта a cam-shaft
1. The indicator
2. Люфт
3. A bolt
4. A cam-shaft
5. A persistent washer

14.7 Persistent washer for adjustment axial люфта a cam-shaft. It is delivered in spare parts with the specified thickness (in brackets the size in mm).
1. A label With
2. Without a label
3. Кернение
4. To a lateral part of the engine

15.1 Surface of a support of a cam-shaft

15.2 Measurement of a basic neck

15.3 Check of palpation of a cam-shaft

15.4 Check of deterioration of cams of a cam-shaft

2. Remove pushers together with the case and platens with коромыслами.
3. Remove a face cover (photo).
4. Keeping a cam-shaft, turn away the central bolt (photo). Get a bolt and a washer.
5. Cautiously get an epiploon and a cam-shaft (photo).
6. Grease basic necks and establish a cam-shaft. Tighten a bolt and check up axial люфт (photo). Люфт should be 0,03-0,06 mm.
7. If люфт exceeds norm a persistent washer replace (photo).

15.5 Checked surfaces of a hydropusher

15.6а Check up diameter of a pusher...

«The previous page
4.13. Heads of cylinders - removal and installation
The following page»
4.15. Details клапанного the mechanism - check