> Четырехцилиндровыв engines. Nissan Terrano II (with 1985 on 1999 of release)
Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
3.1. The general data
3.2. Kinds of the repair work which is carried out without dismantle of the engine from the car
3.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step.
3.4. A cover of a head of cylinders - removal and installation
3.5. The platen with коромыслами - removal and installation
3.6. The platen with коромыслами - dismantling and assemblage
3.7. A cam-shaft - removal and installation
3.8. A cam-shaft, support and коромысла - check
3.9. Springs of valves and маслосъемные caps - replacement
3.10. A soaking up collector - removal and installation
3.11. A final collector - removal and installation
3.12. A head of cylinders - removal
3.13. A head of cylinders - installation
3.14. The oil pump - removal and installation
3.15. The oil pump - check
3.16. A pulley коленвала - removal and installation
3.17. A forward epiploon коленвала - replacement
3.18. A forward cover - removal and installation
3.19. A chain and asterisks - removal and installation
3.20. The oil pallet - removal and installation
3.21. A flywheel (a leading disk of the hydrotransformer) - removal and installation
3.22. A back epiploon - replacement
3.23. Engine support - replacement
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system


3. Четырехцилиндровыв engines

Specifications (all the sizes long in mm)
Numbering of cylinders
Operating procedure
Working volume of engines:
Type Z24J (after 1987)
2389 sm3
Type КА24Е (after 1990)
2389 sm3
Backlashes in valves See Gl.1

Engines Z24i if K24 (in brackets the different data of day of the engine is specified: К24, other data is identical)

Diameter of basic necks 32,935 - 32,955

Axial люфт
The sizes of cams
38,477-38,527 (44,839-45,0291
Limiting deterioration
Palpation in the centre of an average basic neck
Diameter of support
Backlash in basic necks of a cam-shaft
The oil pump
Backlash in gearing of gear wheels:
The standard
The limiting
Backlash between a conducted gear wheel and the pump case
The standard
The limiting
Face backlash 0,06
Deformation of a plane of the case of the pump
No more than 0,03

The inhaling moments (in Н.м.).
Bolt of an asterisk of a cam-shaft
Bolts натяжителя and успокоителя chains
6-9 (7-11)
Pulley bolt коленвапа
Bolts of a head of the block of cylinders:
1st stage of an inhaling
2nd stage
3rd stage
To weaken bolts
4th stage
5th stage
Бодты a final collector
Bolts of fastening of a flywheel (leading disk of the hydrotransformer)
115-125 (85-96)
Bolts of fastening of a cover of a head of cylinders
1-3 (3,6-7,2)
Bolts of a forward cover (only for Z24i)
Bolts М6
Bolts М8
Bolts and nuts of a soaking up collector
Bolts and nuts of the oil pallet
Bolts of the oil pump
Bolts of platens коромысел
14-22 (32,4-36)

Connection order свеч with the distributor on engine Z24i

Arrangement of cylinders and direction of rotation of the distributor

3.5а the Mark in a pulley division About on a scale for piston installation in ВМТ.

«The previous page
2.46. The oxygen gauge
The following page»
3.1. The general data