Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
2.1. Introduction
2.2. Maintenance service terms
2.3. An order of performance of adjustments - broad-brush observations
2.4. Check of level of liquids
2.5. Check of level of a liquid in automatic transmission
2.6. Check of level of a liquid of the hydraulic booster of a wheel
2.7. Check of tyres (through each 400 kilometres or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and the oil filter
2.14. Check and adjustment of backlashes of valves
2.15. Running gear and steering greasing
2.16. Suspension bracket and steering check
2.17. Check карданного a shaft
2.18. Exhaust system check
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a distributing box
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and the ventilation filter картера
2.30. Replacement of the fuel filter
2.31. Filter replacement эжекционного the system valve доокисления exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case throttle заслонки
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a distributing box
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement трансмиссионной liquids! In automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of a cooling liquid
2.41. Check and replacement of a zolotnik of ventilation картера
2.42. Replacement свеч ignitions
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and бегунок a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. The oxygen gauge
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 

2-38-zamena-transmissionnojj-zhidkosti-v-avtomaticheskojj-transmissii.html

2.38. Replacement трансмиссионной liquids! In automatic transmission

1. Make a short trip (15-20 mines) to warm up a liquid to working temperature.
2. Prepare a liquid of the recommended mark.
3. Prepare the pallet of necessary capacity for liquid reception, rags and supports.
4. Lift the car and establish on supports.
5. Turn away back and lateral bolts of the pallet картера transmissions (working in gloves).
6. Turn away forward bolts on 4 turns.
7. Cautiously hook and displace the pallet, merge a liquid in a vessel lost-free.
8. Turn away other bolts and remove the pallet, remove the consolidation rests.
9. Clear the pallet of the rests of a material of consolidation.
10. Put hermetic on a new lining from outside to a plane картера.
11. Grease with hermetic other party of linings establish a lining and in regular intervals tighten bolts with behind the given moment.
12. Lower the car. Fill in a liquid in quantity equal to the merged.
13. Translate the selector in position Р and include a manual brake. Start the engine and translate on idling.
14. Translate the selector in all positions and check up liquid level, if necessary add (see above)
15. Make a short trip and be convinced of absence of a leak.
«The previous page
2.37. Oil replacement in a reducer back (or forward) the bridge		 The following page»
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)