2.24. Check of brakes
1. Besides periodic check of a brake it is necessary to check each time at wheel removal, or at suspicions on their malfunction.
2. For check lift the car.
22.3 Check of level of oil in a reducer of the back bridge
3. Disk brakes are established on forward wheels.
4. Quickly to check up a residual thickness of a material of overlays on колодках brakes (photo) is possible through a window in a support of a forward brake. If deterioration at least one overlay exceeds 0,8 mm that replace all four колодки in the complete set.
5. For more detailed check brake колодки it is possible to remove and clear (Gl. 10).
6. Before wheel installation check up a condition of all hoses and pipelines of a brake contour, presence on them of cracks, corrosion, подтеканий liquids. If necessary replace a hose.
7. Check up a disk condition, at detection задиров, deep development and traces of a strong warming up remove a disk and прошлифуйте.
8. Remove a drum. If a drum заедает on a semiaxis nave drip a getting liquid then repeat removal attempt.
24.6 Control windows in a support of a forward brake
23.2 Scheme of shift of wheels
1. On a car course
2. The shift scheme at a complete set a skating rink as a spare wheel
3. The shift scheme at dual back wheels
4. The shift scheme at a complete set a regular spare wheel the Skating rink in
9. If the drum again does not give in to removal get заглушку on a board of a brake and reduce колодки, having turned a screw-driver a gear nut.
10. As definitive means for removal of drums screw bolts in carving apertures and rolling bolts, remove a drum (photo).
11. The dust which has collected as a result of deterioration колодок to delete by a purge it is forbidden.
12. Check up a thickness of brake overlays back колодок and their condition. If the thickness клееных is less than overlays 1,5 mm (or distance from overlays to heads of rivets) less than 1,5 mm overlays replace. It is necessary to replace overlays also at detection of cracks, a glossy surface, or at pollution by a brake liquid or greasing (photo).
24.12 Removal of a drum заворачиванием bolts in special apertures
24.14 Thickness of a fractional overlay of a brake
13. Check up a condition of springs.
14. Check up presence of traces подтеканий a brake liquid on wheel cylinders for what cautiously hook and take away an external sealant of the cylinder (photo). If under a sealant traces of a brake liquid the cylinder, replace are found out.
15. Clear a drum rags moistened in spirit.
16. Check up presence on drums of deep development, cracks, furrows and the painted sites. If defects cannot be removed an emery paper drums should be removed and pierced.
17. Establish brake drums.
18. Establish wheels and lower the car.
19. The manual brake should be adjusted, if at 6-10 clicks of the lever of a brake and neutral transfer the car is not kept on lifting (Gl. 10).