Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
2.1. Introduction
2.2. Maintenance service terms
2.3. An order of performance of adjustments - broad-brush observations
2.4. Check of level of liquids
2.5. Check of level of a liquid in automatic transmission
2.6. Check of level of a liquid of the hydraulic booster of a wheel
2.7. Check of tyres (through each 400 kilometres or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and the oil filter
2.14. Check and adjustment of backlashes of valves
2.15. Running gear and steering greasing
2.16. Suspension bracket and steering check
2.17. Check карданного a shaft
2.18. Exhaust system check
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a distributing box
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and the ventilation filter картера
2.30. Replacement of the fuel filter
2.31. Filter replacement эжекционного the system valve доокисления exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case throttle заслонки
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a distributing box
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement трансмиссионной liquids! In automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of a cooling liquid
2.41. Check and replacement of a zolotnik of ventilation картера
2.42. Replacement свеч ignitions
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and бегунок a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. The oxygen gauge
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







2-16-proverka-podveski-i-rulevogo-upravleniya.html

2.16. Suspension bracket and steering check

1. Check "these knots is recommended to be combined with any procedure at which the forward part of the car rises.
2. Signs of malfunction of a steering and a suspension bracket are raised люфт a wheel, a strong inclination of a body at passage of turns, body vibrations at driving on rough road, wheel jamming at turn.
3. Check up work of shock-absorbers for what some times sharply press each corner of the car and release, If after one-two pressing the car body does not come back in a starting position it specifies in an exit of shock-absorbers out of operation and necessity of their replacement. By pressing and отпускании the car listen to sounds which publish suspension bracket details.
4. Lift a forward part the car and establish on supports.
5. Check up a condition of all fastenings, and also leaks from the steering mechanism and shock-absorbers.
6. Clear and check up integrity of sealants of spherical support and tips of steering draughts.
7. Check up люфт bearings, having shaken a wheel in a vertical plane. At notable люфте adjust bearings.
8. Ask the assistant to shake a wheel in a horizontal plane, observing of spherical support and tips of draughts. Attentively check up люфты all spherical hinges connecting сошку with lateral draughts, the pendular lever and the central cross-section draught. The pendular lever fastens to bolts to a frame. Preliminary check up an inhaling of all fastenings.
9. Check up люфт in the steering mechanism for what keeping сошку turn a wheel (it is carried out with the assistant). Wheel moving  at motionless сошке specifies in deterioration of the steering mechanism. If люфт it is observed only in position of wheels corresponding to driving on a straight line the worm of a steering reducer If люфт it is observed in any position is worn out, up to a full reversing of wheels the shaft bearing сошки is worn out. In deterioration of a reducer also specify oil leaks. In this case the reducer should be removed for check and repair.
10. Check up люфт on a rim of a wheel which should not exceed 35 mm. Raised люфт specifies in deterioration of hinges and the steering mechanism.
11. Check up a condition of details of a back suspension bracket (rubber plugs, fastenings, etc.).

«The previous page
2.15. Running gear and steering greasing
The following page»
2.17. Check карданного a shaft