Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
2.1. Introduction
2.2. Maintenance service terms
2.3. An order of performance of adjustments - broad-brush observations
2.4. Check of level of liquids
2.5. Check of level of a liquid in automatic transmission
2.6. Check of level of a liquid of the hydraulic booster of a wheel
2.7. Check of tyres (through each 400 kilometres or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and the oil filter
2.14. Check and adjustment of backlashes of valves
2.15. Running gear and steering greasing
2.16. Suspension bracket and steering check
2.17. Check карданного a shaft
2.18. Exhaust system check
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a distributing box
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and the ventilation filter картера
2.30. Replacement of the fuel filter
2.31. Filter replacement эжекционного the system valve доокисления exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case throttle заслонки
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a distributing box
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement трансмиссионной liquids! In automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of a cooling liquid
2.41. Check and replacement of a zolotnik of ventilation картера
2.42. Replacement свеч ignitions
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and бегунок a rotor - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. The oxygen gauge
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







2-13-zamena-masla-i-maslyanogo-filtra.html

2.13. Replacement of oil and the oil filter

1. Oil replacement is the most simple operation which can be executed independently.
2. Filter replacement is expedient for combining with oil replacement.
3. Before the beginning of works prepare all necessary tools and materials.
4. Establish the car on a hole or a platform.
5. Wipe a drain stopper of the pallet.
6. Warm up the engine.
7. Oil varies on completely heated-up engine.
8. Substitute under a drain stopper the pallet and release a stopper.
9. Turn out a stopper, the last some turns rotate a stopper slowly (photo).
10. Merge oil in the substituted pallet.
11. After oil running off wipe a stopper pure rags (photo).
12. Wipe the pallet about a drain aperture and wrap a stopper. Densely tighten a stopper with the set moment.
13. Rearrange the pallet under the oil filter.

13.9а the Drain stopper on engine V6


13.9б the Drain stopper on the 4-cylinder engine


14. By means of a special key release the oil filter (photo)
13,14 Oil filter on engine V6 (at the left) and 4-cylinder (on the right) to release
15. Turn out the filter hands.
16. Be convinced that the type and the sizes of the new filter completely coincide with type and the sizes of the fulfilled.
17. Wipe pure rags a place прилегания the filter on the block of cylinders. Remove a lining.
18. Slightly oil for the engine a rubber lining of the new filter (photo).
13.18 Before заворачиванием the filter grease a filter lining with fresh oil for the engine.
19. Wrap the filter and tighten the filter by hand.
20. Clean the tool and lower the car.
21. Fill in oil of the necessary mark through a stopper mouth oil-jellied on a cover of a head of cylinders.
22. At first fill in about 0,8 l of oil then wait some minutes that all oil has flown down in the pallet and щупом check up oil level.
23. Continue to add oil in the small portions, before mark achievement "L". Start the engine that oil has filled all lubricant channels.
24. Stop the engine and immediately check up oil leaks, if necessary tighten a stopper or the filter.
25. Check up level and if necessary add oil.
26. In we say lies several trips after oil change especially watch closely a leak and check oil level.

14.22 Order of adjustment of valves 1. To a forward part of the engine


13.11 Metal particles which have stuck to a magnetic stopper



«The previous page
2.12. Check and adjustment of a pedal of a brake
The following page»
2.14. Check and adjustment of backlashes of valves