Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
15.1. Specifications
15.2. The general data
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Торсион - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - the general data
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (а/м without the hydraulic booster) - dismantling
15.18. A steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Removal of air from a wheel hydrodrive
15.21. Steering draughts - removal and installation
15.22. Corners of installation of forward wheels - the general data
15.23. Wheels and tyres - the general data
16. A body and furnish elements
17. Electric equipment system
 







15-8-verkhnijj-rychag-i-sharovaya-opora-snyatie-i-ustanovka.html

15.8. The top lever and a spherical support - removal and installation

1. Will lift car redock.
2. Remove a wheel.
3. Turn away the top nut of the shock-absorber and compress the shock-absorber.
4. Slightly raise a jack the bottom lever.
5. Release a nut of the top hinge. Выпрессуйте a stripper a finger of a support from an eye of a fist (photo). Turn away a nut.
6. Turn away bolts of fastening of an axis of the lever to a frame and remove the lever in gathering with a support and adjusting washers. Pay attention to quantity and an order of an arrangement of adjusting washers (photo).
7. Turn away a nut and remove a support. The support not folding and in case of deterioration is replaced entirely.

7.5б the Elementary adaptation for выпрессовки the support, made of a bolt, a nut and a face head


7.5а Vypressovka of a finger of the top support by means of the adaptation



8. The hardened or damaged plugs of the lever replace. For this purpose turn away a nut of an axis and выпрессуйте an axis from the lever (the press is required).
9. Before запрессовкой new plugs moisten with their soap solution. Plugs запрессовываются on a hydraulic press so that the fillet on the plug has rested against reciprocal deepening in a lever sleeve.
10. Insert an axis and dress internal washers so that their rounded parties have been turned inside.
11. Запрессуйте external plugs.
12. Wrap axis nuts.
13. Establish on the lever a support.
14. Establish the lever, having tracked safety of adjusting washers. Tighten bolts with the set moment.

7.6 Bolts of fastening of an axis of the top lever of a suspension bracket


7.15 Check up lever centering, having measured the sizes And and In


8.8 Nut of an axis of the bottom lever


9.3 Details of a back suspension bracket 1. A cross-section bar 2. A longitudinal bar 3. The top bar 4. Draught of the stabilizer 5. The stabilizer 6. At заворачивании bolts and nuts correctly them сориентируйте. Bolts and nuts should correspond the established manufacturer.


15. Check up the sizes And and In (photo). Compare them with specified in Specifications, if necessary adjust.
16. Other operations are carried out upside-down. Bolts and nuts definitively tighten after car lowering on wheels. Check up and adjust corners of installation of wheels.


«The previous page
15.7. Bars and suspension bracket extensions - removal and installation
The following page»
15.9. The bottom lever and a spherical support - removal and installation