Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
15.1. Specifications
15.2. The general data
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Торсион - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - the general data
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (а/м without the hydraulic booster) - dismantling
15.18. A steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Removal of air from a wheel hydrodrive
15.21. Steering draughts - removal and installation
15.22. Corners of installation of forward wheels - the general data
15.23. Wheels and tyres - the general data
16. A body and furnish elements
17. Electric equipment system
 







15-6-torsion-snyatie-i-ustanovka.html

15.6. Торсион - removal and installation

1. Lift car redock.
2. Turn away a nut and get an adjusting bolt (photo).

4.2 Otvorachivanie of a nut of a rod of the shock-absorber


4.3 Coupling bolt of the shock-absorber


4.6 Nut of the bottom fastening of the back shock-absorber


4.7 Nut of the top fastening of the back shock-absorber


5.2 Nut of an adjusting bolt торсиона (on all-wheel drive cars)


5.3 Covers and lock ring of the lever торсиона 1. A cover 2. A lock ring


5.4 Nuts of fastening of the lever торсиона to the bottom lever of a suspension bracket on rear-wheel cars


3. Remove a cover and get a lock ring (photo)
4. On rear-wheel cars displace the lever торсиона from outside bodies towards a back part of the car and get торсион. Remove the lever торсиона from the bottom lever suspension brackets (photo).
5. On all-wheel drive cars turn away bolts of fastening of the lever торсиона to the bottom lever (photo) and remove торсион together with the internal lever, having displaced it towards a forward part of the car.
6. Check up a condition торсиона, presence on it крутильных deformations, damages, check up integrity шлицевых the terminations.
7. On rear-wheel cars fix the lever торсиона on the bottom lever, tighten bolts with the set moment. Grease шлицы and insert торсион into the lever from outside suspension brackets.

5.5 Nuts of fastening of the lever торсиона to the bottom lever of a suspension bracket on all-wheel drive cars


5.9 Before installation торсиона the backlash With should be equal to the Island 1. The bottom lever 2. The buffer


5.10 Establish the motionless lever торсиона from outside frames and adjust so that backlash G corresponded to norm 1. On rear-wheel а/м 2. On all-wheel drive а/м


8. On all-wheel drive cars fix торсион on the bottom lever and tighten bolts with the set moment.

Внимание1.
If both acted in film торсиона establish them on former places, being guided on labels R (right) and L (left).

9. Raise a jack the bottom lever against the stop lever buffers in a frame (photo).
10. Establish the motionless lever and adjust a starting position of the mobile lever торсиона so that backlash G corresponded specified in Specifications (photo).
11. Establish a lock ring in a flute of the mobile lever and dress a cover.
12. Rotating a nut of the motionless lever, establish the size L выступания a bolt (photo).

5.12 Rotating a nut, establish the size L выступания a bolt of the motionless lever 1. On rear-wheel а/м 2. On all-wheel drive а/м


5.13а the Size Н which should be exposed at adjustment торсиона on rear-wheel cars 1. The centre of an axis of the bottom lever of a suspension bracket 2. A boat of fastening of an extension


5.13б the Size Н which should be exposed on all-wheel drive cars 1. The bottom edge of the terminator of turn of wheels


6.2а Details of fastening of an extension on rear-wheel cars 1. Persistent washers 2. A frame 3. An extension 4. The plug 5. A fillet


13. Lower the car on wheels and press out a suspension bracket. Check up amplitude качания lever N in the specified points (photo). If the size Н does not correspond specified in Specifications rotating a bolt nut торсиона, establish the standard size.
14. Check up and adjust corners of installation of wheels (it is carried out in car-care centre).


«The previous page
15.5. Shock-absorbers - removal and installation
The following page»
15.7. Bars and suspension bracket extensions - removal and installation