Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
15.1. Specifications
15.2. The general data
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Торсион - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - the general data
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (а/м without the hydraulic booster) - dismantling
15.18. A steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Removal of air from a wheel hydrodrive
15.21. Steering draughts - removal and installation
15.22. Corners of installation of forward wheels - the general data
15.23. Wheels and tyres - the general data
16. A body and furnish elements
17. Electric equipment system
 







15-5-amortizatory-snyatie-i-ustanovka.html

15.5. Shock-absorbers - removal and installation

Forward shock-absorbers
1. Turn out wheels, lift car redock. 2. Turn away a rod nut, remove a washer and the plug (photo).
3. Turn away a nut and get a coupling bolt (фота).
4. Installation is carried out upside-down. The head of the bottom bolt should be turned forward on a car course.

1.3 Details of a back suspension bracket of car "Pathfinder" 1. A basic cup of a spring 2. A bar 3. The shock-absorber 4. A cross-section bar 5. A spring 6. A longitudinal bar 7. The stabilizer 8. Draught of the stabilizer 9. To a forward part of the car


3.3 Before turning away a draught nut designate зтилки, washers and гшокладки


3.5 Bolts of an arm of the stabilizer.


Back shock-absorbers
5. Lift a back part of the car for a beam of the bridge and establish on a reliable support.
6. Turn away a nut of the bottom fastening of the shock-absorber to an arm of the bridge (photo).
7. Turn away a nut of the top fastening of the shock-absorber and remove the shock-absorber (photo)
8. Establish shock-absorbers in a former order, nuts definitively tighten after car lowering on wheels.


«The previous page
15.4. The stabilizer - removal and installation
The following page»
15.6. Торсион - removal and installation