15.21. Steering draughts - removal and installation
1. Lateral draughts, cross-section draught concern steering draughts, сошка and the pendular lever (photo).
2. All steering draughts can be removed in gathering with the pendular lever and сошкой. After dismantle of draughts it is necessary to check up corners of installation of wheels. Nuts of tips definitively tighten after car lowering.
3. Расшплинтуйте also turn away nuts (photo).
20.3 Details of lateral draught 1. An external tip 2. A collar 3. The carving plug 4. An internal tip
4. Выпрессуйте fingers of tips of draughts a special stripper (photo) also get draught.
5. Check up люфт in spherical fingers, if necessary fingers replace.
6. If necessary disassemble draughts for what designate position of tips in the plug, turn away bolts of collars and turn out both tips.
7. Assemblage and installation are carried out upside-down. If the removed tips combine the labels put before dismantling are established. If new draughts expose the size And on the removed draughts (photo) are established. After assemblage check up and adjust corners of installation of wheels.
20.9 Details of the pendular lever
1. A cover
2. An arm
3,6. The plug
4. The mzjatnikovyj lever
5. Заглушка butterdishes
7. A washer
8. A nut
20.4 Vypressovyvanie of a finger of a tip
20.7 Size And which should be exposed on new draughts
21.1 Corners of installation of forward wheels
1. A vertical
2. A line parallel to an axis of symmetry of the car
4. An axis of spherical support of a suspension bracket
5. A longitudinal angle of slope of an axis of turn
6. A convergence of wheels
The pendular lever
8. Люфт in the pendular lever it is eliminated by installation of new plugs.
9. Turn away bolts of fastening of an arm of the lever to a frame (photo).
10. Расшплинтуйте also turn away a nut, выпрессуйте a finger of the pendular lever from cross-section draught (photo).
11. If it is necessary to replace plugs turn away a nut, remove a washer and remove the lever from an arm, get plugs. Replace plugs and collect the lever.
12. Installation is carried out upside-down. Tighten all nuts with the set moment.
13. Расшплинтуйте also turn away all nuts of cross-section draught.
14. Выпрессуйте fingers also get draught.
15. Check up a condition of plugs of draught, if necessary replace.
16. Installation is carried out upside-down.
Draughts of a steering in gathering
17. Turn away a nut сошки and press сошку from a reducer shaft.
18. Turn away bolts and remove the pendular lever.
19. Расшплинтуйте also turn away a nut of lateral draughts on rotary fists, выпрессуйте fingers.
20. Remove all draughts.
21. Installation is carried out upside-down