Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
15.1. Specifications
15.2. The general data
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Торсион - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - the general data
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (а/м without the hydraulic booster) - dismantling
15.18. A steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Removal of air from a wheel hydrodrive
15.21. Steering draughts - removal and installation
15.22. Corners of installation of forward wheels - the general data
15.23. Wheels and tyres - the general data
16. A body and furnish elements
17. Electric equipment system
 







15-15-zamok-rulevojj-kolonki-snyatie-i-ustanovka.html

15.15. The lock of a steering column - removal and installation

1. Prepare срезные screws of fastening of the lock (get only in car-care centre Nissan).
2. Remove a wheel.
3. Remove a casing of a steering column.
4. Accurately drill two срезных the screw, having picked up a drill for diameter of a rod part of the screw.

15.1 For access to a reducer it is necessary to shine a rubber apron


15.2 Bolt of the bottom hinge (on the car сги дроусилителем)


15.3 Removal сошки from a shaft of a reducer 1. The case of a reducer 2. Сошка


15.5 Bolts of fastening of a steering reducer are in a channel of the left longeron of a frame


5. Turn away two additional screws and remove the lock. Disconnect wires.
6. At installation combine apertures and wrap screws. Check up, having inserted a key, work of the lock and tighten screws.
7. Tighten срезные screws to обламывания heads (photo).
8. Other assemblage is carried out upside-down.


«The previous page
15.14. A wheel - removal and installation
The following page»
15.16. A steering reducer - removal and installation