Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
15.1. Specifications
15.2. The general data
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Торсион - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - the general data
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (а/м without the hydraulic booster) - dismantling
15.18. A steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Removal of air from a wheel hydrodrive
15.21. Steering draughts - removal and installation
15.22. Corners of installation of forward wheels - the general data
15.23. Wheels and tyres - the general data
16. A body and furnish elements
17. Electric equipment system
 







15-14-rul-snyatie-i-ustanovka.html

15.14. A wheel - removal and installation

Attention.
Cars of 1996 are equipped by a pillow of safety which is in the container in the steering wheel centre. At performance of works near to inertial gauges, a steering column, the panel of devices disconnect from the battery of a wire and wait not less than 10 minutes

1. Disconnect the battery from weight.
2. Remove or disconnect the container with a safety pillow (if it is provided), having addressed in car-care centre.
3. On cars till 1994 turn away 2 screws from the back party of a wheel (photo), on cars from 1994 of release remove the panel of a sound signal for what turn on крестовой a screw-driver screws in the bottom part of spokes and remove a collar.
4. Be convinced that the wheel is unblocked and turn away a wheel nut.
5. Designate position of a wheel concerning a shaft (photo).
6. Выпрессуйте a steering wheel, having wrapped stripper bolts in the special apertures provided ы to a nave of a wheel on both parties of a shaft (photo). It is forbidden to remove a wheel blows on a nave.
7. Before installation grease a back rubbing part of a wheel (photo).
8. Installation is carried out upside-down. Combine the put labels, tighten a nut with the set moment and check up freedom of rotation of a wheel.


«The previous page
15.13. A steering - the general data
The following page»
15.15. The lock of a steering column - removal and installation