Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
13.1. Specifications
13.2. The general data
13.3. The device of an automatic interlock of a nave - removal and installation
13.4. Semiaxes - removal and installation
13.5. Полуось - dismantling and assemblage
13.6. A nave and a rotary fist - смятие and installation
13.7. Nave epiploons – removal and installation, adjustment of bearings
13.8. Forward карданный a shaft - removal and installation
13.9. Epiploons of a forward reducer - replacement
13.10. A forward reducer - removal and installation
13.11. Epiploons of a distributing box - replacement
13.12. A distributing box - removal and installation
13.13. A distributing box - dismantling
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







13-4-poluosi-snyatie-i-ustanovka.html

13.4. Semiaxes - removal and installation

1. Lift the car and establish on supports.
2. Remove a wheel.
3. Remove the automatic interlock device.
4. Get from a semiaxis pin a lock ring.

2. З Details of the device of an automatic interlock 1. A counternut of a nave 2. A lock washer 3,8. A spring ring 4. A washer 5. A lead In 6. A washer And 7. A washer In 9. A lead And 10. A spring 11. A sealing ring 12. The case 13. Details of the device of an automatic interlock * It is greased


2.4 After case removal get a lock ring, washers and a lead In 1. A lead In 2. A lock ring 3. A washer And


3.6 Put labels on the case of the sliding hinge and on the reducer case then turn away bolts


5. Remove a washer and a lead of Century
6. Turn away bolts of fastening of a semiaxis to a reducer (photo).
7. Turn away the bottom bolt of the shock-absorber.
8. Remove a support (Gl. 10), take aside and fix.
9. Disconnect steering draught.
10. Slightly will hang out the bottom lever a jack. Turn away a nut and bolts and disconnect spherical support of levers. Cautiously remove полуось in gathering with a rotary fist.
11. Beat out полуось from a fist (photo).
12. At detection of defects on details disassemble полуось (see more low).
13. Installation is carried out upside-down. Check up axial люфт semiaxes (photo). If люфт exceeds norm pick up a lock ring on a thickness (see Specifications).


«The previous page
13.3. The device of an automatic interlock of a nave - removal and installation
The following page»
13.5. Полуось - dismantling and assemblage