Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
13. A running gear of cars with the wheel formula 4x4
13.1. Specifications
13.2. The general data
13.3. The device of an automatic interlock of a nave - removal and installation
13.4. Semiaxes - removal and installation
13.5. Полуось - dismantling and assemblage
13.6. A nave and a rotary fist - смятие and installation
13.7. Nave epiploons – removal and installation, adjustment of bearings
13.8. Forward карданный a shaft - removal and installation
13.9. Epiploons of a forward reducer - replacement
13.10. A forward reducer - removal and installation
13.11. Epiploons of a distributing box - replacement
13.12. A distributing box - removal and installation
13.13. A distributing box - dismantling
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system

superfighters game


13.1. Specifications

Naves of forward wheels
Preliminary tightness of bearings
2,15-6,4 Н.м.
Axial люфт semiaxes
0,1-0,3 mm
Thickness of adjusting washers of a semiaxis
1,1-2,1 mm through 0,2 mm
Adjusting length of covers semiaxes (mm)
The internal hinge
Till 1990
Since 1991
The external hinge
Till 1990
Since 1991
Quantity of the greasing put in the hinge
In the internal hinge

220 г
In the external hinge

160 г
Kardannyj shaft


No more than 0,6 mm
Axial люфт

No more than 0,02 mm

1.1а the Drive of forward wheels 1. Торсион 2. The top spherical support 3. A nave 4. A board of a brake 5. B.Nizhnjaja's rotary fist a support 7. Полуось 8. A cross-beam of the stabilizer 9. A bar 10. To a forward part of the car 11. The bottom lever 12. The top lever 13. The shock-absorber

1.1б the Bottom view of a running gear of the car 4x4 1. The forward bridge 2. A forward reducer 3. Transmission 4. Forward карданный a shaft 5. A distributing box 6. Back карданный a shaft

Forward reducer
Preliminary tightness of bearings of a leading gear wheel of the main transfer (at the established epiploons)
А/м with 4-cylinder engines
0,9-1,7 Н.м.
А/м with engines V6
1,13-1,72 Н.м.
The inhaling moments (Н.м.)
Nave nut
Bolts of fastening gear муфты naves of a forward driving wheel
Bolts of fastening of the top spherical support to the suspension bracket lever
Nuts of fastening of the bottom spherical support
Bolt of fastening of draught of the lever to a rotary fist
Support finger
Fastening of an arm of a support to a rotary fist
Bolts of fastening of a semiaxis to differential
Bolts of fastening of a flange карданного the hinge to a reducer
Bolts of fastening of a flange карданного the hinge to a distributing box
Nut of a forward reducer
А/м with 4-cylinder engines
А/м with engines V6
Заглушка a clamp
Nuts of a flange of a distributing box
Bolts of fastening of a distributing box to transmission
Nuts of wheels
Sm of Gl. 1

«The previous page
13. A running gear of cars with the wheel formula 4x4
The following page»
13.2. The general data