Nissan Terrano 2 with 1985 on 1999
1. The maintenance instruction and to maintenance service
2. Car maintenance service
3. Четырехцилиндровыв engines
4. Engines VS
5. All engines
6. Systems of cooling, heating, ventilation and air-conditioning
7. Fuel and exhaust systems
8. System of an electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. A mechanical transmission
11. Automatic transmissions
12. Coupling карданный a shaft and the back bridge
12.1. Specifications
12.2. Coupling - the general data
12.3. A coupling pedal - removal, installation and adjustment
12.4. The main cylinder of coupling - removal, dismantling and installation
12.5. The working cylinder of coupling - removal, dismantling and installation
12.6. The dempfernyj cylinder of coupling - removal, dismantling and installation
12.7. A coupling hydrodrive - removal
12.8. Details of the mechanism of coupling - removal, dismantling and installation
12.9. The vyzhimnoj bearing - replacement
12.10. The directing plug of a primary shaft of a check point - replacement
12.11. A kardannyj shaft, a reducer and the back bridge - the general data
12.12. Карданный
12.13. An average support - replacement
12.14. Kardannye hinges - replacement
12.15. Полуось, the back wheel bearing and an epiploon - removal and installation.
12.16. A reducer of the back bridge - removal and installation
12.17. An epiploon of a leading gear wheel of a reducer - replacement
12.18. The back bridge - removal and installation
13. A running gear of cars with the wheel formula 4x4
14. Brake system
15. Suspension brackets and a steering
16. A body and furnish elements
17. Electric equipment system
 







12-1-tekhnicheskie-dannye.html

12.1. Specifications

Coupling
Palpation of a frictional disk
No more than 1,0 mm
Plane deformation диафрагменной springs
No more than 0,5 mm

The inhaling moment (Н.м.)
Bolts of fastening of coupling to a flywheel
19,7-27,1
Bolts of fastening of the main cylinder
7,4-11,1
Bolts of fastening of the working cylinder
27,1-37,0
Fastening bolts демпфера
3,7-5,0

Kardannyj shaft
Palpation
No more than 0,6 mm
Axial люфт in крестовине
No more than 0,2 mm
Thickness of lock rings карданных hinges
Since 1990
With 1991 г
1,49 mm
1,99 mm
1,52 mm
2,02 mm
1,55 mm
2,05 mm
1,58 mm
2,08 mm
1,61 mm
2,11 mm
1,64 mm
2,14 mm
1,67 mm
2,17 mm
2,00 mm
2,20 mm
2,02 mm

2,04 mm

2,06 mm

2,08 mm

2,10 mm

2,12 mm


The inhaling moment (Н.м.)
Fastening bolts карданного a shaft to a flange of a reducer of the back bridge
For rear-wheel cars
35,7-40,6
For all-wheel drive cars (bolts of both flanges of a back shaft)
71,3-80,0
Bolts of fastening of forward section of a shaft to the back
For rear-wheel cars
30,8-40,6
For all-wheel drive cars
71,3-80,0
Nut of a flange of forward section карданного a shaft
For rear-wheel cars
222,6-267,0
For all-wheel drive cars
214,0-250,0
Bolts of fastening of an arm of an average support to a body
14,8-19,7

Reducer of the back bridge and semiaxis
Preliminary tightness of bearings of a leading gear wheel of the main transfer (with the established epiploon)
Reducer Н190А
1,1-1,6
Reducer С200
1,1-1,7
Longitudinal люфт semiaxes
Cars with back drum-type brakes
0,02-0,15 mm
Cars with back disk brakes
0 mm
Thickness of adjusting washers of a semiaxis:
0,05 mm
0,20 mm
0,07 mm
0,50 mm
0,10 mm
1,00 mm
0,15 mm

Preliminary tightness of the bearing (with a new epiploon of a nave)
20,6-30,6 Н

The inhaling moment (Н.м.)
Reducer nut
Н190АИ С200
115,6-266,9
Н233В
178,3-222,6
Bolts of fastening of a reducer
19,7


«The previous page
12. Coupling карданный a shaft and the back bridge
The following page»
12.2. Coupling - the general data